|
|
|
Shenzhen Embedall Technology Co., Ltd.
|
|
| |
|
|
|
|
|
|
 Click to enlarge image
|
 Model Number |
AT91RM9200 |
EBD9200-I
Atmel's AT91RM9200 SoC (System-on-chip) is built around the 200 MIPS ARM920T ARM Thumb processor with integrated 16K-byte instruction and 16K-byte data cache memories. It incorporates a rich set of system and application peripherals and standard interfaces in order to provide a single-chip solution for a wide range of applications that require maximum functionality at minimum power consumption at lowest cost. It features an ETM (Embedded Trace Macrocell) and an enhanced ARM architecture 4v MMU and supports various memories including SDRAM, Static Memory, Burst Flash, Compact Flash, Smart Media and NAND Flash integrated with a wide range of standard interfaces containing serial interfaces, Ethernet MAC interface, USB2.0 Full Speed Host and Device ports, I2S, I2C, SPI, etc. To complete the offer this SoC benefits from many debug features including JTAG-ICE, a dedicate UART debug channel (DBGU) and an embedded run-time trace.
EBD9200 Evaluation Board is based on Atmel's AT91RM9200 ARM9 microcontroller running at 180MHz. The board itself is provided with plenty of example programs. It is a complete Linux development environment that includes all the necessary hardware and software to allow embedded engineers to achieve fast result and reap the benefit of the open source software. Due to the extensive on-chip functions, CPU-intensive applications requiring low power consumption can be realized at low cost. Typical applications are POS (Point-of sale), medical system and industrial automation requiring Ethernet and USB. Users can fully take use of it for evaluation, development and applications.
Hardware specification
■ Processor : AT91RM9200 based on 16/32-bit ARM920T core microcontrollers
■ Power input : DC9.0V
■ 32M parallel flash memory
■ 32M SDRAM (support 64M for option)
■ 512k data flash
■ 2 USB Host Port and 1 USB Device Port
■ 2 serial ports with 1 simple interface
■ 1 all connected interface which could connect to RS232 MODEM
■ 2 CAN bus module
■ LCD interface
■ VGA interface
■ RTC DS1307 with battery
■ 1 EEPROM connected to the Two-wire Interface (TWI)
■ 1 10/100M Ethernet interface module
■ SD/MMC interface
■ IDE/CF interface
■ SMC card interface
■ I/O ports all extended via sockets
■ Embedded Trace Microcell (ETM) interface
■ 20pin standard JTAG interface
EBD9200 Software Specification
ADS1.2 test codes
√ NandFlash test
√ SPI DataFlash test
√ SD card test
√ PIO test
√ Can bus test
√ Ds1307 test
√ USB host test
√ USB device test
√ CF card test
ARM Linux for EBD9200 kernel 2.4.27 (in source code)
√ Linux Cross-Compiler tool chain 2.95.3
√ U-boot for Linux
√ Drivers under Linux (all in source code)
vXworks for EBD9200
(if you need the source code, you can send the email to us).
UC/OS-II for EBD9200
(uC/OS-II needs to be licensed if used commercially, please contact Micrium).
EBD9200 Package List
■ One EBD9200 Evaluation Board
■ One RJ45 crossed Ethernet cable
■ One crossed serial RS232 cable
■ One Parallel port cable
■ One WIGGLER JTAG board
■ One A/B-type USB cable
■ CD-ROM, include:
a) user manual
b) circuit schematic drawing
c) ARM Linux BSP
d) Other tools
http://www.embedall.com/aspdeen/En_ProductShow.asp?ArticleID=111
|
|
|
|
| |
|
|
|
Related Keywords:
Bookmark / Share this page