|
|
|
Shenzhen Embedall Technology Co., Ltd.
|
|
| |
|
|
|
|
|
|
 Click to enlarge image
|
 Model Number |
AT91SAM9260 |
SBC9260 Introduce
The Atmel AT91SAM9260 is based on the ARM926EJ-S processor, with 8K byte instruction and 8K byte data cache memories. AT91SAM9260 operates at 210 MIPS with a 190 MHz clock.
Features of AT91SAM9260 include 8K bytes of SRAM and 32K bytes of ROM with single cycle access at maximum processor or bus speed, together with an external bus interface with controllers for SDRAM and static memories including NAND Flash and Compact Flash.
AT91SAM9260 processor?s extensive peripheral set include USB Full Speed Host and Device interfaces, a 10/100 Base T Ethernet MAC, Image Sensor Interface, Multimedia Card Interface (MCI), Synchronous Serial Controllers (SSC), USARTs, Master/Slave Serial Peripheral Interfaces (SPI), a three-channel 16-bit Timer Counter (TC), a Two Wire Interface (TWI) and four-channel 10-bit ADC.
Three 32-bit Parallel I/O Controllers multiplex the pins to/from these peripherals in order to reduce the device pin count, and peripheral DMA channels maximise the data throughput between these interfaces and the on- and off-chip memories.
The AT91SAM9260 has a fully featured system controller for efficient system management, including a reset controller, shutdown controller, clock management, advanced interrupt controller (AIC), debug unit (DBGU), periodic interval timer, watchdog timer and real-time timer. The AT91SAM9260 is available in a 217-ball LFBGA and 208 QFP RoHS-compliant package.
Hardware specification
■ Processor: ATMEL AT91SAM9260 based on 32-bit ARM926EJ core microcontrollers
■ 64 Mbytes of SDRAM memory
■ 64 Mbytes of NandFlash memory
■ one Atmel serial DataFlash®
■ one USB device port interface
■ one USB Host port interfaces
■ one DBGU serial communication port
■ three three-wires serial communication port
■ one additional serial communication port with RTS/CTS handshake control
■ JTAG/ICE debug interface
■ one PHY Ethernet 100-base TX with three status LEDs
■ two Power LEDs
■ one DataFlash, SD/MMC card slot
■ two CAN bus interface
■ RTC with battery
■ PIO
■ Camera interface(multiplexed by serial communication port)
SBC9260 Software Specification
ARM Linux for SBC9260 kernel 2.6.15 (binary)
√ Linux Cross-Compiler tool chain 3.4.1
√ U-boot for Linux & DataFlash boot binary code
√ Drivers under Linux
√ SAM-BA
Vxworks 5.5 for SBC9260 (binary)
√ Drivers under Vxworks
√ SAM-BA
SBC9260 package List
● One SBC9260 Single Board Computer
● One RJ45 crossed Ethernet cable
● One crossed serial RS232 cable
● One IDC10-to-DB9 Cable(Female)
● One IDC10-to-USB Cable(Host)
● One A/B-type USB cable
● CD-ROM, include:
a) user manual
b) ARM Linux binary BSP
c) Vxworks 5.5 binary BSP
d) Other tools
http://www.embedall.com/aspdeen/En_ProductShow.asp?ArticleID=156
|
|
|
|
| |
|
|
|
Related Keywords:
Bookmark / Share this page